TOOLS AND ACCESSORIES

BAND BREAKER MODEL MP 503 The simplest, most versatile and dependable method. Just slip band into slot and rotate handle parallel to band. Will break banding up to 2" wide and .040 thick.

ROPE HOIST MODEL RH 600 Full swiveling safety hooks. 3" diameter sheave pulleys with steel roller bearings. Will operate with any type rope from 3/8" to 1/2" Dia. 600 lbs. Safe working load with 4:1 safety factor. 4:1 ratio with positive locking brake to hold load in position. Zinc plated for corrosion resistance.

"JAWS" MODEL MP 508 The harder you pull, the tighter JAWS grip. Can be used as a pallet and skid puller or sheet metal gripper. Weighing 5 lbs., it will pull 2000 lbs., fits 2" spaced pallets. Opens to 4".

FENCING ACCESSORIES

MINI WIRE CLAMP MODEL MP 189 Designed for use with the Mini-Mule puller, it is essential accessory for barbed, smooth or insulated wire from 1/16" to 1/4" diameter. The Mini Wire Clamp weighs only 15 oz., yet has capacity of 1300 lbs. Provides a sure, positive grip.

POST SLING MODEL MP 502 An anchor for fence stretcher. Eliminates frayed and kinked cable when permanently fastened to the cable hook. Hangs out of the way when not in use and never gets lost or mislaid.

PULL CABLE MODEL MP 501 Required for the proper erection of chain link or other fencing with tension bars. A balanced tension may be applied throughout the installation, making the job smoother, neater and easier.

ADJUSTABLE CHAIN SLING MODEL MP 506 For lifting motors from cars, trucks, tractors and boats. Can be locked with long and short legs to hold a motor at proper angle for installation or removal. Capacity 2350 lbs. A bolt through the anchor lugs converts it to an excellent anchor loop for vertical lifting, horizontal pulling, stretching or positioning.

Home | Mini-Mule | Pack-Mules | Accessories | Blocks

DEUER MANUFACTURING, INC. P.O. Box 4014, Dayton Ohio, 45401-4014 Ph: 937-254-3812 · Fax: 937-254-2991 TOLL FREE: 866-489-MULE (6853)

E-mail DEUER

©Copyright 2004 DEUER, Inc.